When replacing the system board with a new one, stick eight pieces of
new
GUM CUSHION
and one piece of new
CUSHION LED
on the system
board in place.
CUSHION LED
GUM
4.23.2
Installing the System board
To install the system board, follow the steps below and refer to
Figure 4- 30
to
Figure
4-33
.
1. Set the system board in place.
Figure 4-33 Installing the system board
2. Secure the system board with the screws.
3. Connect the LCD/Webcam harness to the connector
CN5390
and
DC IN harness to the connector CN8001 on the
System Board
(FMERSY*)
and arrange the harness to the guide on the Cover
Assembly.
4. Connect the
Keyboard FPC
to the connector
CN3240
and
Keyboard Backlight harness
to the connector
CN3270
on the
System Board (FMERSY*)
.
