4.14 Panel Assembly
Removing the Panel Assembly
Remove the panel Assembly according to the following procedures and Figure 4-20 and Figure
4-21 and Figure 4-22 and Figure 4-23.
1.
Pull up the adhesive from LCD cover
□
,1 as shown in Figure 4-20.
2.
Carefully lift up and rotate the panel from the LCD assembly as the arrow
□
,2 indicates in
Figure 4-21.
3.
Place the panel on a protective surface, such as a foam pad as shown in Figure 4-22.
4.
Disconnect the eDP cable FFC from Camera FPC
□
,3
□
,4
□
,5 and Gently pry up the
Camera FPC
□
,6 as shown in Figure 4-22.
5.
Pull the lock bar outward and disconnect the eDP cable from the touch glass panel
□
,7
□
,8 as shown in Figure 4-23.
