4.11 Touch Pad Module
Removing the Touch Pad Module
Remove the touch pad assembly according to the following procedures and Figure 4-15 and
Figure 4-16.
1.
Disconnect the touch pad FFC from touch pad module
□
,1
□
,2.
2.
Peel away the conductive tape
□
,6 on logic upper assembly from touch pad.
3.
Remove the two M2×2 screws securing the tp support bracket to the logic upper assembly
□
,3.
4.
Remove tp support bracket
□
,4 from the logic upper.
5.
Gently push the touch pad away from the logic upper assembly
□
,5.
Figure 4-15 Removing the Touch Pad Module
