Installing the thermal module
Install the fan and thermal module according to the following procedures:
1.
Seat the fan in the correct position on the logic upper assembly and insert the fan connector
□
,9 and tuck the fan cable into the fan hook
□
,10. as shown in Figure 4-5.
2.
Tighten the two M2 x 3
□
,2screws to secure the fan to the logic upper assembly, as show in
Figure 4-3.
3.
Check the greasy is attached on the thermal module as shown in Figure 4-6 .
4.
Place the thermal module in the correct position on the motherboard.
5.
Tighten the three M2 x 3 screws according to the number sequence (3->4->5) indicated in
Figure 4-3 to secure the thermal module to the motherboard.
6.
For the w-lan cable routing, tuck the w-lan cable into the fan hook
□
,11, and wlan cable
connector insert the wlan card
□
,12. Finally, paste wlan mylar on the w-lan module
□
,13 as
shown in Figure 4-5.
Figure 4-5 Fan Cable and W-lan Cable Routing
