BlueWave® MX-275 Emitter User Guide
12
Figure 3. Example of Installation using Array Stand
Operation
Note: Please see
BlueWave® MX-Series Multichannel Controller User Guide
for detailed instructions on controller operation.
The BlueWave® MX-275 system will create a fan noise during startup and during high
output operation. This is normal and is not of concern unless there is a temperature
warning on the controller.
Always verify proper light shielding is in place prior to starting to process using the
emitter.
The green status LED on the top of the unit may be observed directly to indicate the
emitter is commanded to be on.
WARNING!
Looking directly at the high-intensity light emitted by the
BlueWave MX- series emitters can result in eye injury. To prevent eye injury,
never look directly at the energy-emitting end of the high-intensity emitter and
always wear protective goggles.
To avoid accidental exposure, always point the
emitter at the curing substrate.
