USE R GUI DE
|
BL UE WAVE
®
A X -5 5 0
29
Maintenance
Product Cleaning
Product cleaning is limited to wiping the product with a damp cloth. Do not soak. Isopropyl Alcohol and mild detergent may be
used for cleaning the product.
Emitter Replacement
To replace the emitter, follow these steps:
1.
Place the unit on a flat surface and remove the 4 M3 Screws located on the sides using a 2.0-mm Hex Screwdriver.
(Figure 46)
2.
Remove the Emitter section carefully and replace it with the desired Emitter. (Figure 47)
3.
Reinstall the 4 M3 Screws Removed in Step 1 (Figure 48). The unit is now ready to be used.
Figure 46.
Remove M3 Screws
Figure 47.
Remove Emitter Section
Figure 48.
Replace Emitter and Reinstall Screws
