background image

Page 

3

Please read the following Instructions before installing:   

z

  Verify that all parts are included. Do not install if the products or hardware are damaged. Not all 

hardware included will be used. 

z

  Please contact a qualified installer. 

z

  This product contains moving parts. Use with caution. 

z

  Determine approximate location for mounting and be sure to consider the display size, extension, 

height adjustment and pitch/roll requirements. 

z

  This product contains small items; please keep these items away from children. 

z

  Do not exceed the maximum weight capacity for this product. Exceeding the weight capacity can 

result in serious personal injury or damage to equipment! 

z

  The table being used for installation must be stable and strong enough to support the DE540S 

mount and display.   

 

Specifications 

Weight Capacity 

17.6lbs (8kg) 

Suits LCD Flat Panel Displays 

12” -24”(300mm-610mm) 

Length Retracted 

2.95" (75mm) 

Length Extended 

18.66" (474mm) 

Height Range (Limited by Display Size)                

9.76" (248mm) 

18.5" (470mm) 

Vertical Height Adjustments Allows on Pole 

12.9" (327mm) 

Mounting surface thickness 

Desk Clamp: 2.95" (75mm) 
Grommet: 2” (50.8mm) 

Tilt  

+/-90° 

/-90° 

Display Rotation 

360° 

 

 

 

 

Summary of Contents for Butterfly DE540S














Reviews: