RAPIDDOC
®
PRO KIOSK
INSTALLATION GUIDE
1
MTI P/N 063-00180 rev E ©2021 MTI All Rights Reserved
www.MTIGS.com | T:801.653.3807
OVERVIEW
185-00528 Through-Hole Mounting Accessory (Sold separately)
Materials in Box
Mounting
Plate
Use only power supply with output ratings 24VDC
max., 2.7A max., of PS2 or LPS
Alcohol Wipes (10)
(4) Mounting Screws,
6 X 5/8”,100º
Flt Hd Phl, Zinc
(5) Screws
M3x8mm Long,
Flat-Head-Phil
Threaded
Pipe
Adhesive
Pad
PSA with paper
release liner this
surface only.
Nut
(2) Security Screws,
Metric, M4 X 10mm
Round Hd, Torx, W/Lock Washer
Red Handle Tool
Authorization Card
If lost or
stolen, contact
customer
service for
replacement.
The socket-outlet (power adaptor) shall
be installed near the EQUIPMENT and
shall be easily accessible.
Access Card (5)
RapidDoc
®
Kiosk
C.A. Cover
(Minimal Cables)
C.A. Cover
(No Cables)
Cable Access
(C.A.)
“If the Kiosk is not mounted to a
counter or table it may fall,” causing
damage to the Kiosk or a person.
USB cables may be disconnected as
it moves around a surface. See page
9 for mounting instructions.
The applied nameplate is located at
the bottom of the product.
Equipment is only suitable for
mounting at heights < 2 meters.
See page 9 for mounting
instructions.
-CONTROLLED DOCUMENT-
063-00180
E-0
Status: Approved
ECO-112676
ECO-112676