Dyaco FT98A-YT41, Service Manual

Page: 80 / 90

S S e e r r v v i i c c e e M M a a n n u u a a l l
79
3.
Use 14mm T-shaped socket wrench to loosen 4 screws, use 14mm open end wrench to loosen 1 belt tension screw, remove
motor and replace with new.
4.
Reassemble in reverse order of disassembly, re-hook belt (readjust belt to be parallel with main frame after re-hooking). Do
not tighten 4 securing screws yet.
5.
Use 14mm open end wrench to adjust belt tension using tension measuring device. Adjust to white LBS area between
70-75LBS. Use 14mm T-shaped socket wrench to secure and tighten 4 securing screws.
6.
Connect grounding wires and motor wires (red M+, black M-)