Customer service 1-888-707-1880
Email: [email protected]
19
factory setting mode. In this mode, press
【
LEVEL
＋
/LEVEL
－
】
to select, and press
【
ENTER
】
to
the next setting. When the last option is set press
【
ENTER
】
, or press
【
STOP
】
during setting,
the setting value will be stored and restarted.
Option item
1.
UNIT(KM/ML)
－
Set to English or Metric display readings
2.
BRIGHT (0~15)
－
Adjust backlight brightness
3.
SPECIAL (YES/NO)
－
Pull wire motor for special drive action
4.
MAX LOAD (16 20 24 32)
－
Set the maximum resistance value
5.
UX DATA (ON/OFF)
－
4 sets of user option switches
6.
WHEEL (10~99)
－
Wheel setting
The exercise equipment can also play music wirelessly via Bluetooth. Turn on your mobile phone
or tablet’s Bluetooth function. Search for the name "Bt-speaker" in your device’s Bluetooth menu.
Tap to connect. Now your device can transmit music to the exercise equipment.
General Maintenance
1. Wipe down all areas in the sweat path with a damp cloth after each workout.
2. If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of two
reasons:
I. The hardware was not sufficiently tightened during assembly. All bolts that were installed
during assembly need to be tightened as much as possible. It may be necessary to use a larger
wrench than the one provided if you cannot tighten the bolts sufficiently. I cannot stress this
point enough; 90% of calls to the service department for noise issues can be traced to loose
hardware or the rear rails being dirty.
II.
The crank arm nut and/or the pedals need to be retightened.
3. If squeaks or other noises persist, check that the unit is properly leveled before calling the service
department.
