Customer service 1-888-707-1880
Email: [email protected]
10
2
STEP
HARDWARE
STEP 2
1.
Use the L Allen Wrench (92) to tighten the front and rear stabilizers (5,
6) on the mounting brackets with 4pcs of 5/16" × 3/4"_Socket Head
Cap Bolt (112) ,4pcs of 5/16" × 1.5T Split Washers (35) and 4pcs of
5/16"× 18 × 1.5T Flat Washers (33).
2.
Use the 14.15m/m Wrench (69) to tighten both pedals (15) onto the
crank arms.
Note: the right pedal is inserted to the crank clockwise and the left pedal is inserted
counterclockwise.
3.
Tighten four 5/16" × 3/4" Button Head Socket Bolts (32) with the
Combination M5 Allen Wrench & Phillips Head Screwdriver (68) to
Secure the left and right Hand Pulse Sensor Arms (100, 101) on the
Console Mast (2).
#32.
5/16" × 3/4"_
Button Head Socket Bolt
(4 pcs)
#33.
5/16" × 18 × 1.5T_
Flat Washer (4 pcs)
#35.
5/16" × 1.5T_
Split Washer (4 pcs)
#112.
5/16" × 3/4"_
Socket Head Cap Bolt
(4 pcs)
