Customer service 1-888-707-1880
Email: [email protected]
11
3
STEP
HARDWARE
STEP 3
1.
Secure the Seat (19) to the sliding seat carriage by using the
Combination M5 Allen Wrench & Phillips Head Screwdriver (68) to
tighten 4pcs of M6 × 35L Phillips Head Screws (55).
2.
Install the Seat Handlebar (7) on the sliding seat carriage by using the
L Allen Wrench (92) to tighten 4pcs of 3/8" × 1-3/4" Button Head
Socket Bolts (61), going through the Seat Handlebar (7) and 4pcs of
3/8" × 19 × 1.5T Flat Washers (62), then use the 14.15m/m Wrench
(69) to tighten 4pcs of 3/8" × 7T Nyloc Nuts (63).
3.
Install the Backrest Bracket (53) on the Seat Handlebar (7) by using
the L Allen Wrench (92) to tighten 2pcs of 3/8" × 3/4" Button Head
Socket Bolts (60), going through the Seat Handlebar (7) and 2pcs of
3/8" × 19 × 1.5T Flat Washers (62), then use the 14.15m/m Wrench
(69) to tighten 2pcs of 3/8" × 7T Nyloc Nuts (63).
4.
Install the Backrest (52) on the Backrest Bracket (53) by using the
Combination M5 Allen Wrench & Phillips Head Screwdriver (68) to
tighten four 1/4" × 1"_Phillips Head Screws (59) and four 1/4" × 13 ×
1T_Flat Washers (58), then cover the Backrest Bracket (53) with the
Backrest Cover (54).
5.
Connect the Lower and Middle handpulse wires (95, 108).
#55.
M6 × 35L_Phillips
Head Screw (4 pcs)
#61.
3/8" × 1-3/4"_
Button Head Socket
Bolt (4 pcs)
#62.
3/8" × 19 × 1.5T_
Flat Washer (6 pcs)
#63.
3/8" × 7T_
Nyloc Nut (6 pcs)
#60.
3/8" × 3/4"_
Button Head Socket
Bolt (2 pcs)
#58.
1/4" × 13 × 1T_
Flat Washer (4 pcs)
#59.
1/4" × 1"_
Phillips Head Screw
(4 pcs)
