Customer Service 1-888-707-1880
17
Dyaco Canada Inc. 2016
Email: [email protected]
INCLINE
1. Incline may be adjusted any time after belt movement.
2. Press and hold the Incline
Up/Down
keys to achieve desired gradient. You may also choose
a more rapid increase / decrease by selecting the
Quick Incline
key, then 0 through 9.
• The display will indicate incline percent in increments of .5 as adjustments are made.
• The incline will return to zero unless the main power switch or safety key are turned off while
is at a higher setting.
DOT MATRIX CENTER DISPLAY
Twenty columns of boxes (10 high) indicate each segment of a workout. The boxes only show
an approximate level (speed/incline) of effort. They do not necessarily indicate a specific value -
only an approximate percent to compare levels of intensity. In Manual Operation the
speed/incline dot matrix window will build a profile “picture” as values are changed during a
workout.
1/4 MILE (0.4 KM) TRACK
The 1/4-mile track (one lap) will be displayed around the dot matrix window. The flashing
segment indicates your progress. Once the 1/4-mile (Metric - 0.4 km) is complete this feature
will begin again. The Lap track will move in a counterclockwise direction there is a lap counter
in the message window for monitoring your distance.
PULSE GRIP FEATURE
The Pulse (Heart Rate) window will display your current heart rate in beats per minute during
the workout. You must use both stainless steel sensors on the stationary grips or the heart rate
transmitter chest strap to display your pulse. Pulse value displays anytime when the upper
display is receiving a Pulse signal. You may not use the Pulse Grip feature while in Heart Rate
Programs.
CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note:
This is only a rough guide used for comparison of different exercise sessions, and is not
to be used for medical purposes.
HANDRAIL BUTTONS DISABLE SWICH
To the right of the
Stop
button there is a Handrail control switch and an indicator light next to it
when the indicator light is lit, the handrail switches are disabled. This allows you to use the full
length of the handrails without fear of activating the speed or elevation controls.
TO TURN TREADMILL OFF
1. Display will automatically turn off (go to sleep) after 30 minutes (no key operations).The
treadmill will draw very little current in display mode (about as much as your screen when it is
turned off).
2. Remove the tether cord.
3. Turn off the main switch on the front of the treadmill, below the motor cover.
