- 6 -
M965706 Rev. 1.0 (3/17)
11
MAINTANENCE
If water flow rate is lower than stated, flow regulator might be clogged by debris in the water lines.
TO REPLACE FLOW REGULATOR
• Turn water supplies off.
• Use TOOL PROVIDED
(1)
to loosen handle ring. Use hex key to loosen handle set screw.
Pull handle off.
Figure A.
• Use TOOL PROVIDED
(2)
to remove cartridge.
Figure B.
• Push the inlet hoses up to remove the manifold from faucet.
Figure C.
• Use hex key to remove NUT
(3)
.
Figure C.
• Replace FLOW REGULATOR
(4)
with new one.
Figure C.
• Follow the above steps in reverse to install faucet components.
12
CARE INSTRUCTIONS:
DO:
SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT:
DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
Figure A.
1
2
Figure B.
Figure C.
4
3
