- 5 -
M965706 Rev. 1.0 (3/17)
10
• With HANDLE
(1)
in OFF position, turn on WATER SUPPLIES
(2)
and check all connections for leaks.
• Operate HANDLE
(1)
to flush water lines thoroughly.
CHECK DRAIN CONNECTIONS
• Operate POP-UP KNOB
(3)
and fill lavatory with water. Check that DRAIN STOPPER
(3)
makes a good seal and retains
water in sink. If DRAIN STOPPER
(3)
does not seal properly, please refer to Troubleshooting section in these instructions.
• Release POP-UP KNOB
(3)
down and check all drain connections and “P” trap for leaks. Tighten if necessary.
TEST INSTALLED FITTING
4
“P” TRAP
WASTE
OUTLET
2
2
OFF
ON
3
1
HOT
COLD
