61
61
Rear Cleansing, Rear Cleansing - Mild, and Front Cleansing
Symptom
Cause
Solution
Page
Water does not
spray out.
The water shutoff valve is
closed.
Turn the open/close handle
counterclockwise 90°.
14
The filter is clogged.
Clean the filter.
52
The water supply pressure is
too low, or the water pressure
setting on the remote control
is set to its lowest level.
Press “+” on the Spray Strength
button.
19, 20, 21
The seat sensor does not
detect a user.
Sit on the toilet seat.
34
Your clothes mean that
detection by the seat sensor is
difficult.
Allow the sensor to detect your
skin.
34
The toilet is being flushed.
This is not a problem. Priority
is given to flushing. Press the
button for rear cleansing or front
cleansing again after the toilet
has been flushed.
19, 21
It takes longer
than usual until
water sprays out.
The temperature of the water
supplied to the seat unit is too
low.
This is not a problem. When
water temperature is extremely
low in winter, etc., it may take
longer than usual until water is
sprayed due to preparation for
spraying warm water.
─
Water is not warm. The water temperature is set at
its lowest setting.
Press the Water temp. button
and adjust the temperature to
the
appropriate level.
16
The water
pressure is too
low.
The temperature of the water
supplied to the seat unit is too
low.
This is not a problem. When
water
temperature is low in winter,
for example, the water pressure
may become slightly weaker.
─
The toilet is being flushed.
This is not a problem. Priority
is given to flushing. Press the
button for rear cleansing or front
cleansing again after the toilet
has been flushed.
19, 21
The nozzle guard
is unstable.
The cleaning brush or other
tools touched the guard during
cleaning and the guard has
fallen off.
Attach the nozzle guard
correctly.
44
Troubleshooting