5
Four Square Control Console Direction Label
A custom label with various compass directions is included for the Four Square Control Console.
You may either write the directions on the white blocks that are on the face of the Four Square
Control Console, or you can use the custom label that is included. The number one (default)
position on the Transmit Four Square Controller is the first red push button on the left.
Depending on your antenna set up, you can cut the desired compass directions from the label, peel
the back off, and place the label on the Four Square Control Console.
This is the typical set up for North America
# 1 is NE - #2 is SE - #3 is SW - #4 is NW
