- 63 -
DXE-T001 - DX Engineering SO-239 Connector Installation Tool Kit
This DX Engineering SO-239 connector installation tool kit offers an easier installation of chassis or bulkhead mount SO-239 coaxial
connectors. Having the right tools can make all of the difference in your shack, and this handy DXE tool
provides you with a special dual-use stainless steel wrench, plus a multipurpose 6-in-1 screwdriver/nut
driver tool. One end of the wrench is a 3/4 in. semi-box wrench with a pass-through for coaxial cable--
perfect for tightening the larger nuts used to mount bulkhead connectors. The other end is a 3/16 in. box
wrench for tightening mounting nuts with SO-239 hardware. You'll receive six combinations - two Phillips
heads, two flatheads, and a 1/4 in. nut driver and a 5/16 in. nut driver, which store in the handle of the
screwdriver. The added SO-239 wrench is ideal for use with the
DXE-UHF-FDFB-KIT
- Silver Plated
Female SecureMount
™
Bulkhead Connector.
DXE-RADW-1K - Pre-Cut Radial Wire Set for 10, 15, and 20M. Includes 1/4 in. Ring Terminals
DXE-RADW-40MK - Pre-Cut Radial Wire Set for 40M. Includes 1/4 in. Ring Terminals
DXE-RADW-80MK - Pre-Cut Radial Wire Set for 80M. Includes 1/4 in. Ring Terminals
For elevated feed verticals
, use these pre-cut resonant radial wire sets for optimal performance. Allows construction
of 1/4 wavelength resonant radial wires for each band. Includes terminals for 1/4'' bolts and wires precut to correct length.
Wire is 14 AWG stranded copper with a relaxed vinyl insulation.
For ground-mounted verticals, use one of our bulk radial wire kits.
DXE-8UDU002 24 Inch DX Engineering RG-8/U Foam, Coax Cable Assembly
This DX Engineering cable assembly uses high quality RG-8 coaxial cable and includes Silver/PTFE PL-259 (UHF)
connectors installed at each end. The coaxial cable features a flexible 11 gauge stranded copper center, foam
polyethylene dielectric, 97% coverage bare copper shield and a PVC jacket. Connectors are soldered rather than
crimped and an adhesive lined shrink tubing provides weather protection.
DXE-8XDU002 24 Inch RG-8X Foam Coax Cable Assembly
This DX Engineering cable assembly uses high quality RG-8X coaxial cable and includes Silver/PTFE PL-259 (UHF)
connectors installed at each end. The coaxial cable features a flexible 16 gauge stranded copper center, foam
polyethylene dielectric, 95% coverage bare copper shield and a PVC jacket. Connectors are soldered rather than
crimped and an adhesive lined shrink tubing provides weather protection.
Vertical Antenna Guying Kits 4/5/6-BTVs & other Verticals
Live in an area that experiences high gusts of wind? Take a look at our BTV Guying Kits to safe guard your station,
work and hard earned money.
DXE-GUY100-KIT
Guying Kit for Hustler
®
4-BTV & other Verticals Not Exceeding 30 ft.
DXE-GUY200-KIT
Guying Kit for Hustler
®
5/6-BTV & other Verticals Not Exceeding 30 ft.
DXE-GUY400-KIT
Guying Kit for DX Engineering & other Verticals exceeding 30 ft.
DXE-GUY1000-KIT
Guying Kit for DX Engineering Vertical Antennas and Masts
Vertical Antenna Base Matching Network - DXE-VMN-1
The DXE-VMN-1 Vertical Antenna Matching Network is custom designed for use with the Hustler
®
5- and
6-BTV and other base-fed quarter wave vertical antenna systems. In some vertical antenna
installations with excellent radial systems, achieving the best SWR on 80 meters may be difficult without
some means of adjusting reactance. The VMN-1 allows easy adjustment for lowest SWR. The DXE-
VMN-1 Vertical Antenna Matching Network will aid in tuning the customer selected portion of the 80
meter band to the minimum SWR without affecting operation on the other, higher frequency bands. The
#12 AWG coil wire is tin-nickel plated for corrosion resistance, ease of soldering and long term reliability.
The Vertical Matching Network may be installed between ground and the feedpoint of any quarter wave
base-fed vertical antenna - including mobile antennas.
