- 61 -
Additional Accessories for your Hustler
®
BTV
61
Additional Accessories for Your Hustler
®
BTV
DX Engineering is proud to offer a comprehensive set of products specifically designed for an easy,
safe and productive quarter-wave HF vertical antenna installation. We are certain that you will be
pleased with your operating results from your properly planned and DX Engineering equipped
Hustler
®
BTV antenna project.
DXE-RADP-3 - Radial Plate, Stainless Steel w/20 sets Radial Attach Hardware, up to 3" pipe
Unique enough to be covered by two US Patents, the DX Engineering Radial Plate is meant for those of you that have or are building
a quarter wave vertical antenna and who want an easy, neat and effective way to connect those essential radial wires
and the coax to your vertical antenna for the lowest takeoff angle and strongest signals. Stainless steel construction
assures that your signal won't disappear like a disintegrating aluminum radial plate. This plate will work perfectly
with most commercially available vertical antennas such as the Hustler® BTV series (4-BTV thru the 6-BTV), the
SteppIR™ (BiggIR or SmallIR) or one of your own construction. Radial Plate is made of 304 Stainless Steel, .125
inch thick, 12" x 12" outside dimensions. The use of an anti-seize compound such as Jet-Lube SS-30 must be used
with any Stainless Steel hardware to prevent galling.
DXE-RADW - 500K or 1000K Bulk Radial Wire Kits and Components
DXE-RADW - 500KBD or 1000KBD - Bulk Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box
stores. It will last much longer in contact with soil than bare wire.
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 radial wire anchor pins or biodegradable anchors - Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500K
Bulk Radial Wire Kit, 500 ft. Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K
Bulk Radial Wire Kit, 1000 ft. Spool of Wire, 40 Lugs, 200 Staples
DXE-RADW-500KBD
Bulk Radial Wire Kit, 500 ft. Spool of Wire, 20 Lugs, 100 Biodegradable Staples
DXE-RADW-1000KBD
Bulk Radial Wire Kit, 1000 ft. Spool of Wire, 40 Lugs, 200 Biodegradable Staples
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of
damaging your radials during lawn maintenance. 100 count - 6'' Pins 11-Gauge
DXE-STPL-100P
Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P
Radial Wire Anchor Pins, 300/pack
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3”
biodegradable
anchors that are produced from recycled PLA
(Polylactide Resin). Depending on the weather conditions, they will degrade in about a year. They are easily installed and
will hold radial wires in place until lawn roots overtake them - and then disappear. Ecologically friendly!
