DX Engineering 4-BTV Installation Instructions Manual Download Page 62

Page: 62 / 64

- 62 -

DXE-RADW-20RT/-32RT/-65RT Pre-Assembled, Radial Wire, w/ crimped 1/4" ring Terminals, 20 Pack

The DXE-RADW Radial Wire Kits include the highest quality 14 gauge stranded copper wire with a relaxed black PVC insulation
for easy installation of your radial system.  They allow fast and easy installation of your radial ground system, and
permit you to mix and match different length to fit the available space. The stranded wire and relaxed insulation
mean that the wire will lay flat as you place it on the ground - easy to install! The twenty pre-cut radial wires
include 1/4" ring terminals professionally crimped on one end for quick and easy attachment to the radial
plate.  These Radial Wire Kits are designed for users of vertical antenna systems which have the need for a high
quality radial system for optimum antenna performance. The 1/4" ring terminals are machine crimped for maximum
grip.  Soldering is not required for strength, but is recommended if installed in corrosive environments such as salt
spray.



Packed 20 Radial Wires per package



14 gage, stranded copper wire



Black relaxed PVC insulation



1/4" Ring Terminal professionally crimped on each Radial Wire



3 lengths to choose from: 20 Ft (-20RT), 32 Ft (-32RT), 65 Ft (-65RT)

DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20-pk

This is a set of 20 ring terminals for AWG #14 to #16 wire with a clearance hole for a 1/4" bolt. These are the same
crimp terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.

DXE-RADP-1HWK - Radial Plate Wire Attachment Hardware Kit - Stainless Steel

20 Sets of ALL Stainless Steel Radial Hardware for use with the DX Engineering Stainless Steel Radial Plate.



(20) 1/4'' Bolts - (20) 1/4'' Nuts - (20) 1/4'' Flat Washers - (20) 1/4'' Split Washers - (20) 1/4'' Star Washers

SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.

Our wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert the wire, squeeze
the handle, and listen for the click. That’s the sound of another perfect wire stripping job performed in about 2
seconds - a fraction of the time it takes your pocket knife to do the same job. An adjustable wire length guide
helps you make uniform strips, and a built-in wire cutter and crimper helps you complete your wiring job.



Spring-loaded design



Strips wires ranging from 24 to 10 gauge



built-in wire cutter and crimper

DXE-UHF-FDFB-KIT - Silver Plated Female SecureMount

™

Bulkhead Connector - Dual SO-239

The DX Engineering Silver Plated Female SecureMount

™

Bulkhead Connector is a high-quality silver-plated connector that provides

a positive, permanently secure connection for your coaxial cable. The two-sided SO-239 female connector has a superior silver-
plated body with silver contacts to ensure the best performance for any application. The SecureMount

™

flange, which employs four

mounting screws, means that the bulkhead connector won't work loose like those with concentric nuts and washers. Once mounted to
any panel or bulkhead, the flanged bulkhead connector will provide the best possible connection and stay that way. Additionally,
when using our Radial Plate, Tower Leg Brackets or SO-239 Mounting Brackets, the SecureMount

™

Bulkhead Connectors are the

best way to bond your coax to ground this side of Cad-Welding! Unlike many common nickel-plated bulkhead connectors, our silver-
plated SecureMount bulkhead connectors have no air space within their midpoint. This area of solid and superior PTFE dielectric
between the center conductor and body maintains constant impedance and ultimate performance.



Description: Bulkhead mount, UHF jack to UHF jack (SO-239)



Body Material: Brass



Body Plating: Silver



Body Style: Flanged Dual Female SO-239



Contact Plating: Silver



Frequency Range: DC - 500 MHz