7
If a hood has not previously been connected or by pressing “Settings”, then see the
previous Connecting The Hood section.
Once a connection has been established, the Meter Mode page will be displayed.
ZEROING THE HOOD
In order for the hood to be zeroed for taking readings on a side wall, place the top of
the hood against a wall as shown below. The hood should be away from any sources
of air flow like registers and returns. For the hood to be zeroed for taking overhead
readings, place the hood on the floor with the top facing up as show below.
In order to zero the hood, press the three bars at the top of the screen or slide from the
left or press the menu button. Press the Zero Probe menu selection to zero the hood.
If the diffuser list was set up correctly, and the version is current, then the app will give
the below message. If there isn’t a diffuser list loaded, then the app will generate a
diffuser list.
II. METER MODE
To enter Meter Mode in the app, press the
METER MODE
button from the home
screen.
Overhead
Side Wall
