DVS ProntoXway, Hardware Manual

Page: 35 / 78

2-17
Overview
2
1
3
4
5
I
A
Video I/O Panel Channel 1/2
The video I/O panels of the ProntoXway hold each one digital video in-
terface (DVI connector) for an output of analog and digital video sig-
nals, some links of the serial digital interface (A ports) and a reference
input. There is one video I/O panel available for each video channel of
the ProntoXway (left panel is usually video channel 1, right panel video
channel 2).
Figure 2-14: Video I/O panel for the video channels 1/2
In detail each panel provides the following connectors for its respective
video channel:
Item Description
DVI DVI connector for an output of analog and digital
video signals for video channel 1/2; a pin-out of this
connector can be found in section “Signal In- and
Outputs” on page A-9
(HD) SDI IN BNC connector for an input of digital video signals
(serial digital interface, port A) for video channel 1/2;
either input of YUV in single-link or first stream of
YUVA/RGB[A] in dual-link mode