DVS ProntoXway, Hardware Manual

Page: 15 / 78

1-5
Introduction
2
1
3
4
5
I
A
1.4 Safety Instructions
To use the ProntoXway correctly please heed the following:
General
The ProntoXway has been built according to the applying safety regu-
lations. To minimize the possibility of a faulty operation of the device all
manuals and guides must be available at all times at the operation site.
Before installing and/or using the ProntoXway the manuals and guides
delivered with the ProntoXway must be read and observed.
– Use the ProntoXway only in apparent good technical order.
– The ProntoXway hardware works with voltages that can be hazard-
ous to your health. Never work on the system or access its interior
with the power cable(s) being plugged in. Make sure the power
supply is disconnected from the components you intend to work
on.
– Computer hardware contains components that are sensitive to elec-
trostatic discharge. If you touch them without precautionary mea-
sures, they can be destroyed. Use a wrist strap connected to ground
when accessing electronic parts and take care of grounding the sys-
tem. Avoid touching the internal components of the ProntoXway
whenever possible.
– Computer hardware contains components that are sensitive to
changing voltages. Connecting or disconnecting the ProntoXway to
or from peripheral hardware while any of them is switched on may
damage the hardware. Switch off all peripheral hardware before
connecting or disconnecting anything.
– Use, store and transport the ProntoXway only in compliance with
the technical data laid out in section “Technical Data” on page A-4.
– If fluids or solid objects get inside the casing, the ProntoXway must
be disconnected from the power supply immediately. Before using
the ProntoXway again, it has to be checked by authorized service
personnel.
– Only use a damp tissue without any cleaning agents to clean the
casing.
– The ProntoXway must not be misused, abused, physically damaged,
neglected, exposed to fire, water or excessive changes in the cli-
mate or temperature, or operated outside maximum rating.
Please read the following safety instructions carefully before
attempting any installation and/or performing any work on
the ProntoXway.
If the ProntoXway is not used in compliance with the safety
instructions, the warranty and all resulting liability claims will
be void.