manualshive.com logo in svg

DVS ProntoXway, Hardware Manual

Share
Download
DVS ProntoXway Hardware Manual Download Page 34

2-16

ProntoXway Hardware Guide

2.3.5  Slot Panel Connectors

The ProntoXway provides on its slot panel connector area various con-
nections, such as the graphic card panel and the video I/O panel. Fur-
thermore, if applicable, some additional panels may be present for 
internal reasons or on customer request.

Figure 2-13: Slot panels on rear

VGA

The on-board graphic card of the motherboard may not be sufficient to 
handle digital video. Then the system will be equipped with an addi-
tional graphic card. The VGA panel is the panel of this graphic card. If 
available, the monitor for the ProntoXway has to be connected here.

For further information about the graphic card, please refer to the orig-
inal manufacturer’s documentation included in the delivery of the 
ProntoXway.

The layout of the slot panel area on your system may differ 
from the figure above: The position of the individual slot panels 
may vary and additional panels may be installed for internal 
reasons or on customer request.

If the VGA panel is present in your system, the VGA connector 
available on the ATX connector panel will not be operational 
(see section “ATX Connector Panel” on page 2-15).

VGA

video I/O panel

video I/O panel

channel 1

channel 2

Summary of Contents for ProntoXway















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands