DVS ProntoXway, Hardware Manual

Page: 30 / 78

2-12
ProntoXway Hardware Guide
The table below shows the signal distribution over the SDI (serial digital
interface) in- and output ports for the different color modes. Please
note that some video modes are available as an optional feature only:
2.3.3 Main Connector Panel
The main connector panel provides the standard in- and outputs of the
ProntoXway to give you the full functionality of the system. It holds, for
example, the connectors for remote control and the digital video in-
and outputs (serial digital interface).
Video Mode
Input
(per video channel)
Output
(per video channel)
(HD) SDI In
1
1) Located on slot panel (see section “Slot Panel Connectors” on page 2-16).
HD In B (HD) SDI Out
1
HD Out B
YC
b
C
r
4:2:2 Y, C
b
, C
r
– Y, C
b
, C
r
–
YC
b
C
r
A 4:2:2:4 Y, C
b
, C
r
A Y, C
b
, C
r
A
YC
b
C
r
4:4:4 Y, ½ C
b
, ½ C
r
½ C
b
, ½ C
r
Y, ½ C
b
, ½ C
r
½ C
b
, ½ C
r
YC
b
C
r
A 4:4:4:4 Y, ½ C
b
, ½ C
r
½ C
b
, ½ C
r
, A Y, ½ C
b
, ½ C
r
½ C
b
, ½ C
r
, A
RGB 4:4:4 G, ½ R, ½ B ½ R, ½ B G, ½ R, ½ B ½ R, ½ B
RGBA 4:4:4:4 G, ½ R, ½ B ½ R, ½ B, A G, ½ R, ½ B ½ R, ½ B, A
The additional connectors of the serial digital interface (i.e. the
main SDI A ports) can be found in the slot panel area (see sec-
tion “Slot Panel Connectors” on page 2-16).
Pin-outs of most connectors can be found in section “Signal In-
and Outputs” on page A-9.
For the availability of connectors not present at the system’s
rear (blind panels) please contact DVS.