60
/
66
SM-1 Ev6/25062014
Diagnostic leds:
LED 1 green:
POWER ON. If led fails to come on, check the power suplly.
If the power lead is OK, control unit is probably at fault
LED 2 yellow: HF PRESENT. Steady light when transmitter is switched on
(insignificant for scanner operation)
LED 3 green:
Flashes evenly during fault-free operation.
Irregular flashing means that the HF channel is probably at fault-please set another channel.
LED 4 red:
If this led flashes, the HF channel is at fault (not in the scanner operation).
Steady light notifies the operator that an output function is critical due to over current.
!!!Attention!!!:
During electro-welding on the machine, dsconnect the receiver from the current supply!
Otherwise there is a risk of damane to the receiver´s electronic systém!
LED 1
LED 2
LED 3
LED 4
