39
/
66
SM-1 Ev6/25062014
± 5 mm
6.18 Adjustment and exchange of the wheel driving chain
Dismount:
-
Wheel suspension lid
-
Tightening segment of the chain (Picture 83)
-
Pull out the teeth wheel from the transmission shaft (Picture 83) – MIND the spring!!!
Mounting:
-
Mount the chain on the chain wheels (roller chain 084-1 * MOFA 1/2“ x 3/16“)
-
Mount the feather in the transmission shaft groove
-
Mount the chain wheel and tighten it with a screw (longer than 30 mm), after tightening replace the screw
for the original screw. Secure it with glue (LOCTITE 243) and tighten it
ATTENTION !!! Do not knock the wheel – transmission clearance!!!
-
Mount the tightening segment
-
Tighten the chain with the adjustment screw 1 (± 5 mm). ATTENTION – the chain must move free!!!
(Picture 83)
-
Glue and slightly tighten screws 2. (Picture 83)( LOCTITE 243)
-
Lubricate with a chain lubrication spray Interflon Fin Lube TF
-
After the aplication let´s it penetrate for 25 minutes then blow the rest out with pressurized air
-
Tighten the lid (seal with silicone)
-
Tightening moment 9 Nm
Picture 83 Picture 84
1
2
2
Teeth
wheel
