27
/
66
SM-1 Ev6/25062014
6.8 Exchange of the pump driving belt SPA1060Lw
-
Lift the mower or tilt it to the side of hydraulic tank!!!!
Dismount:
-
Mowing blade, clutch cover and console of blade hub – see
6.6 Exchange of the blade driving belt
-
Measure the distance of the brake wheel of the clutch x (Picture 52) and make a note of it (approx. 28 mm)
-
Loosen securing bolt holding the clutch
-
Use allen key to turn the clutch to the right
-
Loosen the adjustment nut 1 and securing nut 2
-
Remove bolt 3 and remove spring 4 with nut 2
-
Replace the belts SPA1060Lw
Picture 52
Picture 53
Mounting:
-
Install the belts SPA1060 LW
-
Put the screw 3 through spring 4 and screw in slightly on the securing nut 2. Tighten the nut 2 then.
-
Set the distance x with the adjustment nut 1, tighten slightly the nut 1- both sides are closely each other,
brake is activated promptly but the brake disc must not warm up!. Eventually loosen the nut 1(Picture 52)
