HD/SD Digital Video Switcher DSC928. User’s Manual
The PC used must be in the same IP network as the DSC928. So the first three octets
(numbers) in the PC’s IP Address must match the first three octets of the switcher’s IP address.
The fourth octet should be a different number for the PC and switcher.
To reset the IP Address of the PC/laptop use the Network and Sharing Center option in
Windows Control Panel. Click on Local Area Connection then Properties. Click to highlight
Internet Protocol Version 4 (TCP/IPv4) then click Properties again. Then click Use the following
IP address
Software based Macro functions It is possible to record a Macro type play-list to the
computer when using the DSCRemote software. This Macro function allows these pre-recorded
keyboard actions or selections to be played back within a project where timing is important or
where the same steps are repeated throughout the production. The Macro function buttons are
REC, and PLAY. These buttons are located just above the T-Bar in the SE Remote display.
REC & PLAY functions Left mouse click the gray REC button and it will light up red. All of
your actions when using the Remote Console will now be recorded to file. The only action that
will not be recorded is the T-Bar, use the CUT or AUTO TAKE buttons instead.
Click the red REC button again and a save window will appear. You can now save the
recorded actions as a macro text file to a chosen location on the computer.
Click the gray PLAY button and a load file window will appear. You can now browse to and
load a macro text file.
When you load a file the recorded actions will begin to play back until the end of the file.
TIME function This button is located just above the T-Bar in the DSC928 Remote display .
Mouse clicking on the TIME button will synchronize the time on the DSC928 switcher to the
current time on the computer.
DVLab
25
