HD/SD Digital Video Switcher DSC928. User’s Manual
The switcher’s IP address
The switcher’s IP address can be found and can be changed with the program
EthernetSetup.exe, included in the DSCConfig. installation:
No need installation:
1.
Switch on the DSC928.
2.
Connect DSC928 (RJ45 connector) to PS via Ethernet
After you start the program the window appear:
3. Click “ DSC928 Switcher” - “Network Parameters” will open:
So in the our example PC IP address is 192.168.31.31 but DSC928 IP address is 192.168.22.1
In this case the IP address of the DSC928 must be 192.168.31.XX, where XX - is not involved
in any of the network number, for example 192.168.31.25. You can set it in the Network
parameters window and click OK :
DVLab
19
