HD/SD Digital Video Switcher DSC928. User’s Manual
DSC Remote.exe
It is possible to control the DSC928 with a PC using an Ethernet connection. The DSC
Remote software supplied with the switcher needs to be installed on the computer first:
1.
Connect an Ethernet cable between the PC and the DSC928.
2.
Turn on the PC and DSC928.
3.
Placed DSC928 into PC Control mode. To do this press the PC Control button on its
Control Panel .
4.
Launch the DSCRemote software on the PC.
Remote software displays an image of the SDSC928’s keyboard as shown below
The Settings (S) button is located just above the T-Bar in the display above.
When clicked a new window will open:
This Settings window is used to match the software to the IP address of the connected SE-
2800 switcher. If unknown, the switcher’s IP address may be found using the DSCConfig
software or found and changed by using the EthernetSetup.exe software.
NOTE: It is not possible to run both the DSCConfig and DSCRemote software applications
at the same time.
DVLab
24
