Page 9 of 24
4.2 OSD menu functions
OSD Functions
Image
Brightnes
s
Increase/decrease brightness level.
Press – or + (- + ) Total : 100 steps
Contrast
Increase/decrease contrast level.
Press – or + (- + ) Total : 100 steps
Sharpnes
s
Increase/decrease sharpness level.
Press – or + (- + ) Total : 8 steps
Color
Auto : Auto RGB Calibration
([See appendix IV] in details)
(Function in
ARGB mode only)
Color temp
4
(Adjust the warmness of the image displayed. The higher
temperature the
coolest image looks like. The lower temperature the
warmest image looks like.
Function in ARGB mode only)
4200k
5000k
6500k
7500k
9300k
User
4
R Press – or + (- + ) Total :
100 steps
G Press – or + (- + ) Total :
100 steps
B Press – or + (- + ) Total :
100 steps
Reset
Gamma (0.4/0.6/1.0/1.6/2.2)
Display
(Function in ARGB mode only)
Auto Adjust
Auto adjust the positions, phase, frequency
Phase
Fine tune the data sampling position (adjust image quality)
Press – or + (- + ) Total : 100
steps
Clock
Adjust the image horizontal size
Press – or + (- + ) Total : 100
steps
Display Position
Adjust image position
Sound
(Function when HDMI, Display Port, SDI
connected and selected)
Volume
Increase/decrease volume level, total: 100 steps
Press – or + (- + ) Total : 100
steps
Mute
Mute
Output
Select audio output port
Speakers : via CN1 & J1 connector
SPDIF : via CN11 connector
System
4
Input source select
Input : Select the input video signal
Display Port
VGA
DVI/HDMI
SDI
Autoscan : Enable the Auto source seek function
OSD menu
