![DV Signage MON-150W-SDI Manual Manual Download Page 18](http://html.mh-extra.com/html/dv-signage/mon-150w-sdi/mon-150w-sdi_manual-manual_2543805018.webp)
Page 18 of 24
8. Appendix II – Auto Color Gain
The Auto Color Gain function is supported in the ARGB mode only and is designed to
calibrate the controller to the incoming video signal. In order to calibrate correctly, the display must
be displaying an image containing both black and white data (see illustration below) when the
function is used. The internal processor of the video controller chip will then execute a process to
adjust the relative values of the RGB signals to achieve the best performance. The parameters of the
corrected RGB values are then stored in the controller and are unaffected by the Reset Factory
Defaults function.
Warning
- If the Auto Color Gain is executed without an appropriate image being displayed, then the
process will set incorrect values and the display colors will be distorted. If this occurs, then it can
either be corrected by performing the process correctly or if this is not possible then the Reset Color
Gain function can be used. This function will reset the stored RGB values to a set of approximate
values.