DV Signage MON-150W-SDI, Manual Manual

Page: 19 / 23

Page 19 of 24
9. Appendix III – Serial control protocols
Function Command Description Acknowledge (if enabled)
Menu 0xf7 Menu button pressed Button equivalent
Select-down
button 0xfa Select down button pressed Button equivalent
Select-up button 0xfb Select up button pressed Button equivalent
Right/+ button 0xfc Right/+button pressed Button equivalent
Left/- button 0xfd Left/- button pressed Button equivalent
2. Parameter setting - immediate, relative, reset and query
Function Command Description Acknowledge (if
enabled)
Volume control - left
+ right channel 0x80, “a” | “A”,
nn | “+” | “-“|
“r” | “R” |
“?” Set audio (L+R) volume =
value/increment/decrement
Reset
Query Volume left + right
Volume control -
on/off (mute)
0x80, “m” | “M”,
“0” |
“1“|
“r” | “R” |
“?” Disable audio output
Enable audio output
Reset
Query “0” – audio off (muted)
“1” – audio on
Brightness control 0x81,
nn | “+” | “-” |
“r” | “R” |
“?” Set brightness =
value/increment/decrement
Reset
Query Brightness.
Range: “0””0”-“6””4”
Default: “3””2”
Contrast control
0x82, “a” | “A”,
nn | “+” | “-” |
“r” | “R” |
“?” Set all contrast =
value/increment/decrement
Reset
Query Contrast.
Range: “4””0”-“6””4”
Default: “3””2”
Phase
#
0x85,
nn | “+” | “-” |
“?” Set dot clock phase =
value/increment/decrement
Query Dot clock phase.
(In ARGB mode only)
Image H position
#
0x86,
nnnn | “+” | “-” |
“?” Set img_hpos =
value/increment/decrement
Query Image horizontal position.
(In ARGB mode only)
Image V position
#
0x87,
nnnn | “+” | “-” |
“?” Set img_vpos =
value/increment/decrement
Query Image vertical position.
(In ARGB mode only)
Sharpness 0x8a,
nn | “+” | “-” |”r” | ”R”
|
“?” Set sharpness=
value/increment/decrement
Reset
Query Sharpness
Range: “F””C”-“0””4”
Default: “0””0”
Frequency
#
0x8b,
nnnn | “+” | “-“ |
“?” Frequency =
value/increment/decrement
Query Frequency adjustment
(In ARGB mode only)
OSD H position 0x90,
nnn | “+” | “-“ | “r” |
“R” | “?” Set osd_hpos =
value/increment/decrement
Reset
Query OSD horizontal position
Range: “0””0””0”-“3””E””8”
Default: “1””F””4”
OSD V position 0x91,
nnn | “+” | “-“ | “r” |
“R” | “?” Set osd_vpos =
value/increment/decrement
Reset
Query OSD vertical position
Range: “0””0””0”-“3””E””8”
Default: “1””F””4”
Select menu timeout 0x93,
nn | “+” | “-“ | “r” |
“R” | “?” Select menu timeout =
value/increment/decrement
Reset OSD menu timeout value.
“00” – Continuous.
Value – Round up to