7
RMO10T Description
5 Description
STOP
button
Press to stop a test or stop the alarm buzzer.
Ω
button
Press to start a test
Press to measure the resistance current value.
Press to measure the resistance value in TapC mode
Green LED
• Lights continuously when RMO10T is turned on.
• Flashes when a test can be started.
• Flashes alternately with the red LED during a test.
Red LED
• Lights continuously in case of operational error.
• Lights continuously during discharging process.
• Flashes alternately with the green LED during the Current test.
• Flashes shortly during resistance measurement in the TapC test.
• Flashes alternately with the green LED during the TapC test.
Red LED - Discharge
• The red LED just above the red output connector remains lit until the accumulated energy of the
measured object is reduced to a harmless level
CAUTION
Within the period when the discharge LED lights it is prohibited to disconnect measuring cables.
The discharge diode could not be switched off by the
STOP
button
.
Display
UP/DOWN
buttons to select
a menu and set test
parameters
LEFT/RIGHT
buttons to
navigate in the active
menu
ENTER
button to confirm the
defined test parameters,
Language, and Time and Date
STOP
button to stop a test, to
acknowledge the alarm buzzer
and return to the
Curr
menu
