18
RMO10T RMOWin-T2M Software
7 RMOWin-T2M Software
RMOWin-T2M is a Windows program for working with Winding Ohmmeters RMO10T. It enables the two-
way communication RMO10T to a PC over the USB. Microsoft Office Excel program must be installed on
the PC.
RMOWin-T2M supports the following functions:
- Controlling and starting RMO10T when the tests are performed from the PC; the results could be
stored to PC; results reading interval is adjustable,
- Transfer of test parameters from the local RMO10T memory to the PC with the possibility of writing the
notes on objects being measured, and appropriate comments.
Note:
Using RMOWin-T2M software, a device RMO10T must be operated only from the RMOWin-T2M.
Data transferred from RMO10T can be:
- Displayed in the form of tables,
- Downloaded as an Excel file.
Every test reading parameter contains:
- The memory location,
- The date and the time of the test,
- The real test-current,
- The measured resistance values,
- The measured voltage values,
- The measured ripple values,
- The name of the object (tested device) and the useful comments.
7.1 The minimum system requirements
Processor
: Recommended > 500MHz
Memory
: min 32 Mb
Operating system
: 95/98, NT, 2000, XP
The hard disk space
: > 10 Mb
7.2 RMOWin-W installation
To install the RMOWin-T2M software do the following:
- Insert the RMOWin-T2M installation CD into the CD-ROM drive,
- Click on ”Start”,
- Click on ”Run”,
- Click on ”Browse”,
- Select the CD-ROM drive,
- Highlight the ”RMOWin-T2M.EXE”,
- Click on ”Open”,
- Click on ”OK”,
- Follow the instructions displayed on the screen,
- When the installation process has been finished - exit the program.
