DUVLAN Connor, User Manual

Page: 17 / 27

Computer
AUTO ON / OFF
The system turns on when you press a key, or when the sensor enters the speed sensor. The system
turns off automatically when no signal speed indicator, or if no button is pressed within 4 minutes.
RESET
The unit can be reset by either changing battery or pressing the MODE key for 3 seconds.
Display Modes
Scan: To choose the SCAN or LOCK if you do not want the scan mode,press the MODE key when
the pointer on the function you want which begins blinking.
TIME: Press the MODE key until pointer lock on to TIME. The total working time will be shown
when starting exercise. Display the workout time from 00:00 to 99:59.
SPEED: Press the MODE key until the pointer advance to SPEED. The current speed will be
shown.Display the current training speed from 0.0 to 99.9 KM / H (ML / H).
DISTANCE : Press the MODE key until the pointer advance to DISTANCE. The distance of each
workout will be displayed.Display the trip distance from od 0,0-999.9 KM (ML).
CALORIE: Press the MODE key until pointer lock on to CALORIE. The calorie burned will be
displayed when starting exercise.
ODOMETER (IF HAVE): Press the MODE key until the pointer advance to
ODEMETER. The total accumulated distance will be shown. Display the total accumulated distance
from 0-999.9KM (ML).
PULSE (IF HAVE): Press the MODE key until the pointer advance to PULSE .User’s current heart
rate will be displayed in beats per minute. Place the palms of your hands on both of the contact
pads(or put ear-clip to ear),and wait for 30 seconds for the most accurate reading. Pulse will be
displayed from 40~240BPM.
SCAN: Automatically display changes every 6 seconds.
Note:
1. If the computer displays the wrong value, please re-install the battery.
2. The computer uses a battery type: AAA
3. The battery must be removed from the computer before it is phased out of service.
GB