1
3
2
4
5
6
4
7
8
8
5
6
Tip over switch (protection)
Feet
First use
• Remove the device and accessories from the box. Remove any stickers, protective film or
plastic from the device.
• Before using the device for the first time, clean the base with a damp cloth.
• Thoroughly dry the device.
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool;
these could damage the device.
• Place the device on a flat, stable surface, in a place where it cannot fall over.
• Make sure that the power/ mode knob
5
is in the “O” position.
• Connect the device to the mains power.
Control panel
Power / mode knob
5
0 = Power OFF
= Fan mode
I = Low heat mode
II = High heat mode
= Swing mode
Adjustable thermostat knob
6
- = decrease temperature
+ = increase temperature
Modes
Power ON/OFF
• Make sure the power plug is connected to the mains power.
EN 06
7
8
Bottom view of base
