• Unplug the charging cable from the device, which is now ready
for use.
• If the battery level is low, the bottom light of the charging LED
indicator
B
will flash blue, indicating the battery needs to be
recharged.
• The charging LED indicator
C
has 4 lights. Each light
represents 25% of the battery.
Charging the earphones
• Put the earphones
D
into the charging case
B
, respecting the
L and R markings on the earphones and charging case. The
magnetic charging ports
H
will make contact automatically and
the earphones
D
will start charging.
• When charging, the earphone LED indicators
E
light up red.
Once the earphones are fully charged, the earphone LED
indicators
E
switch off and stop charging automatically.
• If the earphones’ battery is low, you will hear a ‘tone’ and the
earphone LED indicator
E
will flash red.
Powering the device ON/OFF
• Once you take the earphones
D
out of the charging case
B
,
they will automatically power ON.
• When the earphones do not have a BT connection for ± 3
minutes, they will automatically switch OFF.
• You can power the earphones back ON, by briefly putting them
back in the charging case and taking them out again.
• You can also manually switch the earphones ON by touching
and holding the touch button
G
for ± 2 seconds.
• Once powered ON, you will hear a ‘tone’ & the earphone LED
indicator
E
will flash blue/red alternately, indicating that the
device is in pairing mode.
• In case the device has already been paired, it will connect
automatically to the BT enabled appliance and the earphones
EN 08
