HP-53K User Manual
Creation Date: Jan 15, 2013
Revision No: V.4.0
Revision Date: April 16, 2021
1/6
MODEL NUMBER:
HP-53K
USER MANUAL
REVISION NO. V.3.0
REVISION DATE: JUNE 3, 2019
HEARING PROTECTOR AM/FM RADIO HEADPHONE WITH AUX-IN JACK
Locations of Controls
(1)
Antenna
(2)
Scan Button (DOWN)
(3)
Scan Button (UP)
(4)
LCD
(5)
Menu Button
(6)
AM/FM Selector
(7)
Auxiliary Jack
(8)
Volume ON/OFF Knob
(9)
Battery Cover
Battery Installation
Open the battery cover. Insert new batteries into the battery chamber in correct polarity. Close the battery cover.
When the sound becomes weak and low battery symbol appears on the Display with beep sound, replace both
batteries with new ones.
With a new set of alkaline batteries, radio can play for around 48 hours in middle volume.
For the U.S.A. users, 9 kHz is recommended.
To select 9 or 10 kHz, the procedure is as shown below:
Insert the battery
During time setting mode, press for the ‘Band” button for around 3 seconds,
9 or 10 kHz will be shown on the display (Note: Please ensure that the volume is in OFF position)
Press Scan Up or Down to select 9 or 10 kHz
After selection, turn on the headset to activate the Radio.
Radio Operation
Turn on the radio by turning the Power ON/OFF Knob (which combines with Volume Control) in clockwise
direction and adjust the sound to your desired level.
Manual search: Press ▲ or ▼ (scan) buttons step by step until it reaches your desired station.
scan: Press ▲ or ▼ (scan) buttons for 2 seconds, then release the button when auto scan starts. Auto scan will stop
automatically when clear reception is received.
Preset Station - 8 preset stations in AM band and FM band. Total is 16 preset stations. Hold Menu button, release
the button when M and the preset station number are flashing. Press ▲ or ▼ to save the station to your desired
position. Press Menu button to confirm your setting.
Listen to the preset status by pressing the Menu button to select preset stations M[1] to M[8].
Aux-in Jack
To connect with other audio devices, plug a 3.5 mm Cable into the Aux-in Jack. Start playing the music from the
audio device.
Adjusting the Fit
(1) Put on the earmuffs with the controls panel over your right ear.
(2) With the headband over the crown of your head, position the muffs to completely enclose your ears. The muffs only
provide hearing protection when worn with the headband over the crown of your head.
(3) Slide the muffs carefully up or down to adjust for a firm, comfortable fit.
(4) Ensure the cushions seal tightly against your head with no interference from foreign objects between the ear cup and
your head (such as pencils or glasses temple arms). Spread the ear cups only enough to clear the ears. Do not return or
reshape the headband.
Note
For best performance, the earmuffs are fitted, adjusted and kept maintenance in accordance to manufacturer’s
instruction.