LED indicator
E
will flash blue slowly.
• To power OFF the earphones, put them back in the charging
case. You can also manually switch OFF the earphones by
touching and holding the touch button
G
for ± 5 seconds. You
will hear a ‘tone’ & the earphone LED indicator
E
will light red
and then turn off.
Making a BT connection (BT pairing):
• Take the earphones out of the charging case, they will
automatically power ON.
• A ‘tone’ will be heard and the earphone LED indicators
E
will
flash blue/red alternately. The devices are now in pairing mode.
• Keep the device and your BT enabled appliance within 1 metre
(3 ft) of each other during the BT pairing process.
• Make your mobile phone, tablet or other BT enabled appliance
search for compatible BT devices. (Make sure the BT function is
turned ON).
• When your BT enabled appliance finds the device, select
”DO-
SV-TWS04”
from the list of found devices.
• A ‘tone’ will sound to indicate successful pairing. The earphone
LED indicator light
E
will stop flashing blue/red alternately. and
will flash blue slowly.
• If a paired BT enabled appliance is in range, the device will
connect automatically.
• The two earphones will pair automatically with each other.
• You cannot pair the earphones when they are placed in
the charging case.
• When the earphones do not have a BT connection for ± 3
minutes, they will automatically switch OFF.
• You can power them back ON, by briefly putting them back in
the charging case.
• You can also manually switch the earphones ON by touching
and holding the “touch button”
G
for ± 2 seconds on
BOTH
earphones.
EN 09
