DC 3800 H/5800 Turbo EX - 19
Part No 94125-I
The warranty period for this machine is two years
and covers manufacturing defects. The warranty is
valid provided that the machine is used in the pro-
per manner for which it was designed and that it is
serviced as required. Normal wear is not covered
by this warranty.
Servicing carried out by anyone other than Dust-
control or its authorised agent shall automatically
void the warranty. No other warranty, express or
implied, shall apply.
Warranty
*
)
The motor protection should never be changed as the factory setting protects against
overheating.
Problem
Fault
Solution
Motor will not start.
Power not connected.
Motor protection tripped. *
)
Connect power.
Investigate why the motor
has overloaded and remedy.
Note that if the machine
has been operating with
too much throttle, the
motor protection may have
tripped to protect against
overheating. Wait 5 minutes.
Reset by
fi
rst turning to the
0 position and then to the
starting position.
EN
G
LI
S
H
Troubleshooting
Motor protection tripped
Motor stops immediately
after starting.
Wrong fuse.
Motor protection tripped. *
)
Fit the correct fuse.
Investigate why the motor
has overloaded. Note that
if the machine has been
operating with too much
throttle, the motor protection
may have tripped to protect
against overheating. Wait
5 minutes. Reset by
fi
rst
turning to the 0 position and
then to the starting position.
