Dustbane Hurricane 890 XTT, Operation Manual

Page: 33 / 64

ENGLISH
25
ENGLISH
25
the battery charger does not work make sure there is voltage to the
battery charger, that the fuses are
not blown and that the current
reaches the battery; try charging
with another rectifier. If the battery
charger is not working, contact the
technical service centre and
indicate the serial number of the
battery charger
At the end of charging with
the electronic battery
charger, the battery does
not provide the correct
voltage (about 2.14 V per
element without load) and
only one or a few elements
appear flat when tested
with the hydrometer
one or more elements are damaged if possible, replace the damaged
elements.
For 6 or 12 V single block batteries,
replace the entire battery
the battery has reached the end of
the charging/discharging cycles
declared by the manufacturer
replace the battery
the battery has been charged with
too high a current
replace the battery
The electrolyte in the
battery is turbid
the battery has been charged
beyond the maximum limit
recommended by the manufacturer
replace the battery