58
BREAK-IN PERIOD
Engine
A break-in period of 10 operating
hours is required before running
the vehicle at sustained full
throttle.
CAUTION:
Never mix oil with
fuel. This vehicle has a 4-stroke
engine. Oil must be added to
engine base only. During this
period, maximum throttle should
not exceed 3/4. However, brief
full acceleration and speed
variations contribute to a good
break-in continued wide open
throttle accelerations, prolonged
cruising speeds and engine
overheating are detrimental
during the break-in period.
10-Hour Inspection
As with any precision piece of
mechanical equipment, we
suggest that after the first 10
hours or 30 days after the
purchase, whichever comes first
your vehicle be inspected by an
authorized DRX2 dealer. This
inspection will give you the
opportunity to discuss the
unanswered questions you may
have encountered during the first
hours of operation. The 10-hour
inspection is at the expense of
the vehicle owner.
PRE-OPERATION
CHECK
The pre-operation check is very important prior to
operating the vehicle. Always check the proper
operation of critical controls, safety features and
mechanical components before starting. If not
done as specified here, severe injury or death
might occur.
• Apply parking brake and check if it
operates properly.
• Check tire pressure and condition.
• Check wheels and bearings for
wear and damage.
• Check location of controls and
ensure they work properly.
• Verify if steering operates freely.
• Activate throttle control lever
several times to ensure it operates
freely. It must return to idle position
when released.
• Activate the brake pedal to make
sure the brakes fully apply. Pedal
must fully return when released.
• Ensure transmission lever is
working then reset in PARK
position.
• Check fuel, oil and coolant levels.
• Check for oil leaks on the
engine/transmission and drive train
components.
• Clean headlamps and taillight.
• Ensure front access compartment
cover and rear storage
compartment cover are properly
latched.
• Look and feel for loose parts
before engine is on. Check
fasteners.
• Ensure the path of travel is free of
persons and obstacles.
• Check operation of ignition switch,
start button, engine stop switch,
headlamps, tail light and indicator
WARNING
Summary of Contents for DRX2
