WARNING!
Hovering Load
The robot arm can sink uncontrolled. Serious
injuries or death can be the consequence.
Do not walk underneath robot arm.
Before working on the robot:
– Pause robot.
– Shut down the power supply. Secure against
reconnection.
– Check holding brake on arm 1.
– If necessary, secure robot arm.
Personnel:
Mechanic
+ additional qualification high tension tech-
nology
+ additional qualification explosion protection
Protective equipment:
Eye protection
Protective workwear
Protective gloves
Anti-Static Safety Boots
Requirements:
Material-carrying lines are purged.
Material supply system is switched off and
secured against reconnection.
Material-carrying lines are depressurized.
Mains disconnecting device on the technology
cabinet is switched off and secured against
reconnection.
Connections are separated
Fig. 13: Disassembling Convoluted Hose
1. Loosen clamps (1) on the robot.
Follow operating instructions of the cat
2. Remove convoluted hose (2) from the robot.
7.4
Disposal
ENVIRONMENT!
Incorrect disposal
Improper waste disposal threatens the environ-
ment and prevents re-use and recycling.
– Always dispose of components in accordance
with their characteristic.
– Collect leaked out operating and auxiliary
materials completely.
– Dispose of operating and auxiliary materials
according to the disposal provisions in force.
– In case of doubt, refer to the local disposal
authorities.
8
Technical data
8.1
Dimensions
N91530017 - Atomizer link EcoGun AS AUTO pro
Denomination
Material number
∅
internal
∅
external
Length
Material
Minimum
bend radius
Paint hose
W40030534
4
6
5 m
PFA
64 mm
Control air hose
W40030001
4
6
10 m
PA
30 mm
Horn air hose
W40030002
6
8
10 m
PA
40 mm
Atomizer air hose
W40030002
6
8
10 m
PA
40 mm
Technical data
03/2019
Atomizer Connection EcoGun - MRS00004EN
18/24
