manualshive.com logo in svg

Durr Dental VistaCam iX HD Smart, Installation And Operating Instructions Manual

Share
Download
Durr Dental VistaCam iX HD Smart Installation And Operating Instructions Manual Download Page 9

2.13 Transport

The original packaging provides optimum protec-
tion for the unit during transport.
If required, original packaging for the unit can be
ordered from Dürr Dental.

Dürr Dental will not accept any responsi-
bility or liability for damage occurring dur-
ing transport due to the use of incorrect
packaging, even where the unit is still
under guarantee.

❯

Only transport the unit in its original packaging.

❯

Keep the packing materials out of the reach of
children.

2.14

Disposal

Unit

The unit must be disposed of properly.
Within the European Union, the unit must
be disposed of in accordance with EU
Directive 2012/19/EU (WEEE).

❯

If you have any questions about the correct
disposal of parts, please contact your dental
trade supplier.

An overview of the waste keys for Dürr
Dental products can be found in the
download area at www.duerrdental.com
(document no. P007100155).

Important information

2109100026L02 1907V001

7

EN

Summary of Contents for VistaCam iX HD Smart













































Reviews:

No comments

Brands by name

Popular brands

Load more brands