Proper operation of the Dürr Dental hardware
and software is coordinated.
❯
Based on the
system requirements for com-
puter systems
, check whether the device is
compatible with the installed hardware/soft-
ware.
7.3
Configuring the unit in
VistaSoft
The camera is preconfigured in the imaging soft-
ware and can be used directly.
The following unit settings can be made in the
configuration of the imaging software:
Standby settings
Standby time
Time until automatic switch-off
if the camera is not moved.
Preset: 2 minutes
Acquisition settings
Camera trig-
gering
The time at which the focus
and the image acquisition are
executed when pressing the
focus button or the trigger but-
ton:
– Upon pressing (preset)
– Upon releasing
❯
Select
> units > VistaCam iX HD > Config-
uration > Unit Settings
.
❯
Changing the settings.
Assembly
2109100026L02 1907V001
19
EN
Summary of Contents for VistaCam iX HD Smart
Page 2: ......
