DuroStar DUAL FUEL HYBRID ELITE DS12000EH User Manual Download Page 58

Page: 58 / 84

Spark Plug Maintenance

The spark plug is important for proper engine operation.
A good spark plug should be intact, free of deposits, and
properly gapped.

Remove spark plug cap

Remove spark plug

Inspect spark plug

Pull on the spark plug cap to remove it.

Unscrew the spark plug from the generator using the spark

plug wrench included with this product.

Visually inspect the spark plug. If it is cracked or chipped,

discard and replace it with a new spark plug. We recommend

using an F6RTC spark plug such as NGK BPR6ES.

CAUTION

: Improper maintenance may cause reduced fuel economy, misfires,

trouble starting, or damage to the spark plug threads.

SPARK PLUG

CONSULT MANUAL

BEFORE REMOVING

MAINTENANCE AND CARE (CONTINUED)

Summary of Contents for DUAL FUEL HYBRID ELITE DS12000EH





















































































Search results

Summary of Contents for DUAL FUEL HYBRID ELITE DS12000EH

Reviews:

Related manuals for DUAL FUEL HYBRID ELITE DS12000EH

Brands by name

Popular brands

DuroStar DUAL FUEL HYBRID ELITE DS12000EH, User Manual

Search results

Summary of Contents for DUAL FUEL HYBRID ELITE DS12000EH

Reviews:

Related manuals for DUAL FUEL HYBRID ELITE DS12000EH

Brands by name

Popular brands