DuroStar DUAL FUEL HYBRID ELITE DS12000EH User Manual Download Page 64

Page: 64 / 84

MAINTENANCE AND CARE (CONTINUED)

Turn the key switch OFF

Turn the key switch counter-clockwise to the “OFF” position
to shut the generator off.

Storing the Generator for Same Day Use

Turn fuel valve OFF/ Store

Turn the fuel valve clockwise to the horizontal position to

shut off the flow of gasoline to the carburetor, then store the

generator.

CAUTION

: Do not obstruct any ventilation

openings and keep the generator in a cool dry

area.

Turn the main breaker OFF

Run the generator

Move the main breaker to the “OFF” position.

Allow the generator to run for 3-5 minutes.

Summary of Contents for DUAL FUEL HYBRID ELITE DS12000EH





















































































Search results

Summary of Contents for DUAL FUEL HYBRID ELITE DS12000EH

Reviews:

Related manuals for DUAL FUEL HYBRID ELITE DS12000EH

Brands by name

Popular brands

DuroStar DUAL FUEL HYBRID ELITE DS12000EH, User Manual

Search results

Summary of Contents for DUAL FUEL HYBRID ELITE DS12000EH

Reviews:

Related manuals for DUAL FUEL HYBRID ELITE DS12000EH

Brands by name

Popular brands