DUROMAX XP18HPX User Manual Download Page 23

Page: 23 / 70

Check fuel level

If running the engine on gasoline check to see that there is

sufficient gasoline in the fuel tank. The gasoline level should

always be under the red fuel level indicator located on the

bottom of the fuel filter cup.

Step 2 - Check the Gas Level (Optional)

DANGER

DO NOT OVERFILL

THE GAS TANK

OVERFILLING CAN RESULT

IN A FIRE, EXPLOSION,

OR DEATH.

1.5”

WARNING

: Gasoline and gasoline fumes are highly flammable.

●

Do not fill the tank near an open flame.

●

Always allow the engine to cool for several minutes before refueling.

●

DO NOT overfill the fuel tank. Fuel expands when shaken or heated. ALWAYS leave

“ space or more at the top of the tank.

●

ALWAYS use fresh fuel or stabilized fuel. Old gasoline (older than 30 days) can cause

permanent damage to the fuel system.

●

Always check for fuel spills.

Summary of Contents for XP18HPX







































































Search results

Summary of Contents for XP18HPX

Reviews:

Related manuals for XP18HPX

Brands by name

Popular brands

DUROMAX XP18HPX, User Manual

Search results

Summary of Contents for XP18HPX

Reviews:

Related manuals for XP18HPX

Brands by name

Popular brands